Dryzone Applicator Guns

54.7263.50

  • Optimised for use with Dryzone System materials
  • High quality construction
  • Available for delivery direct to site
  • Easy to use
Dryzone Applicator Guns - Toner Dampproofing Supplies Ltd
Dryzone Applicator Guns 54.7263.50

Free worldwide shipping on all orders over €850

  • 30 days easy returns
  • Order yours before 11.59 am for same day dispatch

Dryzone Applicator Guns

Dryzone Cream Injection Gun

The Dryzone System Cream Injection Gun is specifically for use with 600ml foil packs of Dryzone DPC Cream. The cartridges are pierced and then placed inside the tube of the gun. Pressing the trigger will cause the Dryzone to move out of the nozzle, enabling the injection of the DPC cream in pre-drilled holes in the mortar course. The gun is re-usable and easily cleanable.

Dryzone High Viscosity Adhesive Applicator Gun

The Dryzone System High Viscosity Applicator Gun is specifically meant for use with Drygrip Adhesive. Simply pierce the foil sausage and insert into the main tube to enable use. The high-torque trigger mechanism of the gun allows for the easy application of adhesive to plasterboard. Just like the Dryzone System Cream Injection Gun, this tool is re-usable and easily cleanable.

Dryzone High Viscosity Applicator Gun with Dryzone Nozzle

The Dryzone HV Applicator Gun is compatible with both products: Dryzone DPC cream and Drygrip Adhesive.

Additional information

Weight 0.22 kg
Dimensions 35.2 × 5.7 × 5.7 cm
Options: No selection

Dryzone Applicator Gun (600ml Foil Cartridges), Dryzone High Viscosity Gun (with Nozzle), Dryzone High Viscosity Gun (without Nozzle)

Brand: No selection

Dryzone

Manufacture: No selection

Dryzone

Effective Treatment: No selection

Rising Damp

GTIN: No selection

Does not apply

Application

Dryzone Damp Proofing Cream Application

  1. First create a series of horizontal drill holes along the mortar course. Typically these holes are 12 mm in diameter and drilled at 120 mm intervals – refer to the Dryzone Application Instructions for details for particular wall thicknesses.
  2. Insert a Dryzone cartridge into the applicator gun, ensuring the pressure piston is fully extended.
  3. Cut into the end of the cartridge so that cream will be able to flow freely. Screw the nozzle cap back onto the gun.
  4. Fully insert the nozzle into the first drilled hole, and then inject Dryzone cream while withdrawing the nozzle at a steady rate. Stop injecting just before removing the nozzle from the wall. Repeat for remaining holes.

Datasheet & Downloads

[elfsight_pdf_embed id=”2″]

Videos

Dryzone Damp-proofing Cream (DPC)

Rising Damp Timelapse

Reviews

There are no reviews yet.

Be the first to review “Dryzone Applicator Guns”

Your email address will not be published. Required fields are marked *