Drybase Flex Adhesive (10 kg)

33.25

Fix your Drybase Flex Membrane securely to walls with Drybase Flex Adhesive. This cement-based adhesive is supplied in a powder form ready to be mixed with water, offering excellent workability and fast setting. Suitable for use on damp substrates, this adhesive provides very good adhesion and complies with EN 12004:2007.

  • Can be applied to damp substrates
  • Easy to mix and fast setting
  • Excellent workability
  • Very good adhesion
  • Compliant with EN 12004:2007

3 in stock (can be backordered)

Add to Cart

Drybase Flex Adhesive 10KG - Toner Dampproofing Supplies Ltd
Drybase Flex Adhesive (10 kg) 33.25
Only 3 items left in stock!

We Deliver Across Ireland & UK

  • 14-Day Returns
  • Place Your Order by 1:00pm for next day dispatch
Shop with Confidence

Drybase Flex Adhesive 10KG - Toner Dampproofing Supplies Ltd
Drybase Flex Adhesive (10 kg)
33.25

Drybase Flex Adhesive: Secure, Reliable Adhesion for Your Drybase Flex Membrane

Drybase Flex Adhesive is a cement-based adhesive designed specifically for fixing Drybase Flex Membrane to walls. Supplied in a powder form that is ready to be mixed with water, this adhesive makes it easy to secure your membrane in place.

Using a suitable trowel, simply apply the mixed adhesive to your substrate, and then secure your Drybase Flex Membrane. The adhesive’s excellent workability and fast-setting formula ensure a straightforward and efficient application process.

In conjunction with Drybase Flex Membrane, a watertight, low-profile sheet membrane, Drybase Flex Adhesive provides superior protection against dampness in walls. The Drybase Flex Membrane features a flexible polypropylene sheet with a fleeced surface on both sides, allowing for secure adhesion to the wall as well as direct application of plaster to its face.

Key Features

  • Application to Damp Substrates: Unlike some adhesives, Drybase Flex Adhesive can be applied to damp substrates, providing flexibility in use.
  • Easy to Mix and Fast Setting: The adhesive is supplied in powder form, ready to be mixed with water. Once applied, it sets quickly for efficient work.
  • Excellent Workability: Drybase Flex Adhesive has been formulated for ease of use, ensuring a smooth application process.
  • Very Good Adhesion: With superior adhesive properties, this product ensures the Drybase Flex Membrane remains securely in place.
  • Compliant with EN 12004:2007: This adhesive complies with the European Standard for adhesives for tiles, demonstrating its quality and reliability.

For effective and dependable adhesion of your Drybase Flex Membrane, choose Drybase Flex Adhesive.

Additional information

Weight 10 kg
Dimensions 30 × 10 × 40 cm
Brand

Drybase

GTIN

Does not apply

Part Number

DB-FA-10

Manufacture

Drybase

Effective Treatment

Damp Proofing, Waterproofing

Size(s) & Packaging

10 kg bags

Accreditation

CE

Appearance

Grey Powder

Storage

Store flat and in a cool, dry, well ventilated place

Shelf Life

12 months

Density

1.48 g/cm3

Coverage

5 kg/m2

Tensile Adhesion Strength

0.64 N/mm2

Coverage Calculator

Application

Application for Drybase Flex Adhesive

Preparation Before Drybase Flex Adhesive can be applied, any structural defects on the substrate must be fixed. Clean the surface of the substrate to ensure maximum bonding of adhesive. Remove all surface laitance, loose particles, paint, etc. by means of wire brushing or light sandblasting. Note: Drybase Flex Adhesive should only be applied in conditions over 5°C.

  1. Application Mix to the ratio 1 part tap water to 3.5 parts Drybase Flex Adhesive by weight (for 10 kg bags, add 2.9 litres of water).
  2. Add the Drybase Flex Adhesive to the clean tap water and mix thoroughly with a mechanical mixer until a smooth consistency is obtained.
  3. Spread the Drybase Flex Adhesive with a suitable trowel to cover approximately 1 m2 at a time. The preferred adhesive thickness is 1 – 2 mm.
  4. Once the Drybase Flex Adhesive has been applied to the wall, offer the Drybase Flex Membrane up to the adhesive and use a trowel to apply gentle pressure spreading from the centre outwards. Make sure there is a 25 mm gap between the floor and the membrane. Ensure that full contact is established between the membrane and the adhesive.
  5. Remove any excess adhesive with a damp cloth before it sets.

Note: Use Drybase Flex Adhesive within 30 minutes of mixing. Once the adhesive is on the wall, Drybase Flex Membrane must be adhered to it within 10 minutes. When the adhesive has cured, surface finishes can be applied such as gypsum based plasters.

Other Information Drybase Flex Adhesive is produced in accordance with ISO 9001 and ISO 14001 quality and environmental management systems. Drybase Flex Adhesive is non-hazardous to the environment.

Datasheet & Downloads

[elfsight_pdf_embed id=”19″]

Pick-up In Store

Reviews

There are no reviews yet

Add a review
You must be logged in to post a review Log In

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: