Dryrod Damp Proofing Rods


  • Dryrod Damp-Proofing Rods are a new high performance rising damp treatment
  • Drill holes along a continuous mortar course and then insert the damp-proofing rods, Water-repellent material along the mortar, The wall will then dry out, No fuss, no mess and no stress
  • Suitable for DIY damp proofing
  • Four times more resistant to rising damp
  • Dryrod – the premium rising damp treatment
Dryrod Damp Proofing Rods 32.40143.99

Free worldwide shipping on all orders over €850

  • 30 days easy returns
  • Order yours before 11.59 am for same day dispatch

Dryrod Damp-Proofing Rods

The next generation of rising damp treatment is Dryrod Damp Proofing Rods. They outperform any other rising damp solution now available in terms of performance and installation speed.

Dryrod Damp Proofing Rods are fibre rods with powerful water repellent they have a diameter of 12 mm and a length of 180 mm. The Dryrod delivery method, which is patented and BBA-approved, ensures that the precise dose of active substance is delivered to the wall every time, permanently eliminating rising damp.

Performance At The Highest Level With No Fuss

Dryrods patented rods are designed to be lightweight and easy to use, with a long-lasting high protection coating for mess-free application in just three simple steps.

  1. Use your Dryzone System drill bit to drill into the mortar course.
  2. Clear debris from each hole with the simple-to-use Dryrod Hole Clearing Tool.
  3. Install by simply pushing a Dry rod into each pre drilled hole.

Dryrod Damp-Proofing rods remove damp from walls that are even severely saturated, since they release silane concentrate into & throughout the mortar to evaporate, the wall and create a barrier against water. This solution is non caustic, non-flammable and solvent-free.

20 Year Protection Against Rising Damp

Once installed, Dryrod Damp-Proofing Rods have a 100% active ingredient that has been thoroughly researched and proven to preform better that competing Damp Proof Courses.

Approved by the British Board of Agrèment (BBA) and the German WTA, Dryrod always provides the precise dose to completely dry out alkaline, neutral, and even highly porous masonry walls. The BBA’s tests found Dryrod highly effective especially in older masonry, cavity walls, rubble infill, random stone and single skin walls. For up to 20 years after installation, Dryrod Damp-Proofing Rods have been confirmed effective against rising damp.

The water-repellent material cures to form a highly effective barrier against rising damp. This not only fully dries out the damp wall, but it also prevents rising damp from returning.

Why Dryrod Damp Proofing Rods?

Dryrod Damp-Proofing rods are available in packs of 10 and 50, for 1.2 and 6 metre coverage. Each Damp-proofing Rod comes in a handy 180mm length that can be cut to size with a Dryrod Cutting Tool, ensuring you always have the right length for your wall.

For walls thicker than 9”, multiple rods can be combined. Dryrod can even be installed in cold conditions, offering an all-weather solution to rising damp.

  • Rising damp permanently eradicated
  • It’s a non-toxic, no-fuss, mess free procedure
  • Dryrod has shown to be effective on highly-saturated walls (even up to 95% percent saturation)
  • It’s quick and easy to install
  • There is no need for specialist equipment.
  • Delivers the precise dose every time
  • Low-hazard

Dryrod Damp-Proofing Rods eradicate rising damp without the need for specialised tools. Dryzones uniquely designed fibre rods are easy to use, eliminating the problems with liquid-based DPC by delivering the correct dosage every time with minimal mess and maximum efficacy.

Additional information

Weight N/A
Dimensions N/A
Size: No selection

10 Pack, 50 Pack

Brand: No selection


GTIN: No selection

5060132761243, 5060132761250

Part Number: No selection

DR-10, DR-50

Manufacture: No selection


Effective Treatment: No selection

Rising Damp

Service Life: No selection

20 Years

Size(s) & Packaging: No selection

Pack of 10 rods of 180 mm length and 12 mm diameter

Accreditation: No selection


Appearance: No selection

cog shaped solid fibre rod, White

Storage: No selection

Store flat and in a cool, dry, well ventilated place

Shelf Life: No selection

12 months in unopened pack

Coverage Calculator


Application for Dryrod Damp-Proofing Rods

  1. Mark your drill bit to the appropriate depth for the wall you wish to treat. A 12 mm Drill Bit is recommended for enhanced debris removal.
  2. Set your SDS drill to rotary hammer mode and attach the suitably marked drill bit.
  3. Identify the lowest horizontal mortar course that is accessible and continuous. Drill holes to the full recommended depth, at regular 120 mm intervals along the wall. As the drill bit approaches the final 40 mm of the intended hole depth, make sure to reduce the pressure you are putting on the drill. Excessive drilling pressure on the rotary hammer setting can result in damage to the far side of the wall.
  4. If debris obstructs the insertion of the damp-proofing rods, the Dryzone System Hole-Clearing Tool can be used to ensure the hole is completely clear.
  5. A standard Dryrod Damp-Proofing Rod is 180 mm in length, which is the exact length required to treat a standard 9″ wall. If the wall is thinner than 9″ then cut the rods down until they are 10 mm shorter than the length of the hole. If the wall is thicker than 9″, cut a second rod down until its length is 10 mm less than the excess left after inserting one whole rod.
  6. Fully insert the rods into each hole, ensuring that the rods are recessed approximately 5 mm from the brick face, taking care not to compress the rods against the back of the holes.

When installing internally, the performance of the rod will not be affected if the rods protrude slightly from the mortar, as a result of it being eroded at the surface. As long as the rod is inserted to the correct depth at the far side of the wall, full treatment will be accomplished and any protruding rods will be covered during redecoration.

Once the damp-proofing rods are installed, they diffuse the active ingredient deep into the wall before it cures to form a water-repellent barrier. This prevents the damp from rising up the wall.

4½″ (115 mm) 9″ (230 mm) 13½″ (345 mm) 18″ (460 mm)
Depth of Drill Hole 95 mm 210 mm 325 mm 440 mm
Length of Dryrod 90 mm 180 mm 270 mm 360 mm

Datasheet & Downloads

[elfsight_pdf_embed id=”1″]


How To Stop Rising Damp With Dryrod Damp Proofing Rods

How To Install Dryrod Damp Proofing Rods

What Is Rising Damp – A Complete Guide To Rising Damp

Rising Damp Timelapse Carried Out By Dryzone

Dryrod Damp Proofing Rods – High Performance Rising Damp Treatment


  1. Anonymous

    Visitor Rating: 5 Stars

Add a review

Your email address will not be published. Required fields are marked *